| Model |
C9200-24T-E |
| Performance |
|
| Switching capacity |
128 Gbps |
| Forwarding rate |
95.23 Mpps |
| Virtual Networks |
4 |
| Stacking bandwidth |
160 Gbps |
| Total number of MAC addresses |
32,000 |
| Total number of IPv4 routes (ARP plus learned routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
| IPv4 routing entries |
4,000 |
| IPv6 routing entries |
2,000 |
| Multicast routing scale |
1,000 |
| QoS scale entries |
1,000 |
| ACL scale entries |
1,600 |
| Packet buffer per SKU |
6 MB buffers |
| Flexible NetFlow (FNF) entries |
16,000 flows |
| DRAM |
4 GB |
| Flash |
4 GB |
| VLAN IDs |
4096 |
| Total Switched Virtual Interfaces (SVIs) |
1000 |
| Jumbo frames |
9198 bytes |
| Features |
|
| Switch fundamentals |
Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder |
| Automation |
NETCONF, RESTCONF, YANG, PnP Agent, PnP |
| Telemetry and visibility |
Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
| Security |
MACsec-128 |
| Physical Specifications |
|
| Chassis Dimensions |
1.73 x 17.5 x 13.8 Inches |
|
4.4 x 44.5 x 35.0 Centimeters |
| weight |
11.02 Pounds |
|
5.0 Kilograms |
| Mean time between failures (hours) |
587,800 |
| Connectors |
|
| Connectors and cabling |
- 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling |
|
- 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling |
|
- 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber) |
|
- 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber) |
|
- SFP+ connector |
|
- Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling |
|
- Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling |
|
- Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor |
| Power connectors |
Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet. |
| Standards, Safety and compliance information |
|
| Standards |
EEE 802.1s |
|
IEEE 802.1w |
|
IEEE 802.1x |
|
IEEE 802.1x-Rev |
|
IEEE 802.3ad |
|
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports |
|
IEEE 802.1D Spanning Tree Protocol |
|
IEEE 802.1p CoS prioritization |
|
IEEE 802.1Q VLAN |
|
IEEE 802.3 10BASE-T specification |
|
IEEE 802.3u 100BASE-TX specification |
|
IEEE 802.3ab 1000BASE-T specification |
|
IEEE 802.3z 1000BASE-X specification |
|
IEEE 802.3bz 10G BASE-T specification |
|
RMON I and II standards |
|
SNMPv1, v2c, and v3 |
| Safety certifications |
- IEC 60950-1 |
|
- UL 60950-1 |
|
- CAN/CSA C22.2 No. 60950-1 |
|
- EN 60950-1 |
|
- AS/NZS 60950.1 |
|
- Class I Equipment |
| Electromagnetic emissions certifications |
- 47 CFR Part 15 |
|
- CISPR 22 Class A |
|
- CISPR 32 Class A |
|
- CNS 13438 |
|
- EN 300 386 |
|
- EN 55022 Class A |
|
- EN 55032 Class A |
|
-5 |
|
-6 |
|
- ICES-003 Class A |
|
- KN 32 |
|
- TCVN 7189 Class A |
|
- V-3 Class A |
|
- CISPR 24 |
|
- EN 300 386 |
|
- EN 55024 |
|
- KN 35 |
|
- TCVN 7317 |
| Environmental |
Reduction of Hazardous Substances (ROHS) 5 |
Đánh giá
Chưa có đánh giá nào.