| Hardware Specifications WDAP-C7200AC |
| Interfaces LAN |
1 x 10/100/1000Base-T RJ45 port |
| Auto-negotiation and Auto MDI/MDI-X |
| Antennas Gain |
2 x 2.4GHz 2.5dBi PCB antenna |
| 2 x 5GHz 4dBi PCB antenna |
| Reset Button |
Reset button on the top cover |
| Press over 7 seconds to reset the device to factory default |
| LED Indicators |
PWR |
| Allow LED to turn off via software control |
| Wireless Interface Specifications |
| Standard |
IEEE 802.11ac (Draft 2.0) 5GHz |
| IEEE 802.11a/n 5GHz |
| IEEE 802.11b/g/n 2.4GHz |
| Antenna Structure |
802.11ac: 2T2R MU-MIMO |
| 802.11n: 2T2R MIMO |
| Modulation |
DSSS |
| Data Modulation |
802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) |
| 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) |
| 802.11b: DSSS (DBPSK / DQPSK / CCK) |
| Band Mode |
2.4GHz / 5GHz concurrent mode |
| Frequency Range |
2.4GHz: America/ FCC: 2.412~2.462GHz |
| Europe/ ETSI: 2.412~2.484GHz |
| 5GHz: America/ FCC: 5.180~5.240GHz, 5.725~5.850GHz |
| Europe/ ETSI: 5.180~5.240GHz |
| Operating Channels |
2.4GHz: America/ FCC: 1~11 |
| Europe/ ETSI: 1~13 |
| 5GHz: America/ FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 |
| Europe/ ETSI: 36, 40, 44, 48 |
| Channel Width |
802.11ac: 20/40/80MHz |
| 802.11n: 20/40MHz |
| Transmission Distance |
802.11ac (draft): up to 30m |
| 802.11n: up to 70m |
| 802.11g: up to 30m |
| Max. RF Power |
5GHz: |
| 802.11ac (VHT20): 15.5dBm |
| 802.11ac (VHT40): 15.5dBm |
| 802.11ac (VHT80): 15.5dBm |
| 802.11n (HT20): 15.5dBm |
| 802.11n (HT40): 15.5dBm |
| 802.11a: 15.5dBm |
| 2.4GHz: |
| 802.11n: 17 ±2.5dBm |
| 802.11b/g: 20 ±2.5dBm |
| Software Features |
| Wireless Mode |
Universal Repeater (AP+Client) |
| Repeater (WDS+AP) |
| AP (Access Point) |
| WDS PTP (Point to Point) |
| WDS PTMP (Point to Multipoint) |
| Client |
| Encryption Security |
WEP (64/128-bit) encryption security |
| WPA / WPA2 (TKIP/AES) |
| WPA-PSK / WPA2-PSK (TKIP/AES) |
| Wireless Security |
Provides wireless LAN ACL (Access Control List) filtering |
| Wireless MAC address filtering |
| Supports WPS (Wi-Fi Protected Setup) |
| Enable/ Disable SSID Broadcast |
| Wireless Advanced |
WMM (Wi-Fi Multimedia): 802.11e Wireless QoS |
| Multiple SSID: up to 5 at 2.4GHz and 5GHz, respectively |
| Wireless Isolation: Enables to isolate each connected wireless client from communicating with each other |
| IAPP (Inter Access Point Protocol): 802.11f Wireless Roaming |
| Provides Wireless Statistics |
| Max. Clients |
Wire: 253 |
| 2.4GHz Wireless: 32 |
| 5GHz Wireless: 32 |
| LAN |
Built-in DHCP server supporting static IP address distributing |
| Supports UPnP |
| Supports 802.1d Spanning Tree |
| Standards Conformance |
| IEEE Standards |
IEEE 802.11ac (Draft 2.0, 2T2R, up to 867Mbps) |
| IEEE 802.11n (2T2R, up to 300Mbps) |
| IEEE 802.11g |
| IEEE 802.11b |
| IEEE 802.11i |
| IEEE 802.3 10Base-T |
| IEEE 802.3u 100Base-TX |
| IEEE 802.3ab 1000Base-T |
| IEEE 802.3x Flow Control |
| Other Protocols and Standards |
CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP |
| Power Requirements |
802.3at PoE, 48-56VDC input |
| Power Consumption |
20W (max.) |
| Mounting |
Ceiling Mount |
| Material |
Plastic |
| Dimensions (Φ x H) |
194 x 49 mm |
| Weight |
300 ±5g |
Đánh giá
Chưa có đánh giá nào.