|
Model
|
RG-AP840-I |
|
Hardware specifications
|
|
Radio
|
Dual-radio dual-band：
Radio 1: 2.4G 11n: 2×2 MIMO
Radio 2: 5G 11ax: 4x4 MIMO |
|
Protocol
|
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac |
|
Operating Bands
|
802.11b/g/n ：2.4G ~ 2.483GHz
802.11a/n/ac/ax ： 5.150～5.350GHz，5.47～5.725GHz，5.725～5.850GHz (vary depending on different countries) |
|
Spatial Streams
|
Up to 6: 2×2:2 in 2.4GHz , 4×4:4 in 5GHz |
|
Max Throughput
|
Maximum throughput of 2.4G: 400Mbps
Maximum throughput of 5G: 4.8Gbps
Maximum throughput per AP: 5.2Gbps |
|
Modulation
|
OFDM：BPSK@6/9Mbps，QPSK@12/18Mbps，16-QAM@24Mbps，64-QAM@48/54Mbps
DSSS：DBPSK@1Mbps，DQPSK@2Mbps，and CCK@5.5/11Mbps
MIMO-OFDM：BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
OFDMA (up to 1024-QAM) |
|
Receiver Sensitivity
|
11b：-96dBm（1Mbps），-93dBm（5Mbps），-89dBm（11Mbps）
11a/g：-91dBm（6Mbps），-85dBm（24Mbps），-80dBm（36Mbps），-74dBm（54Mbps）
11n：-90dBm（MCS0），-70dBm（MCS7），-89dBm（MCS8），-68dBm（MCS15）
11ac HT20：-88dBm（MCS0）, -63dBm（MCS9）
11ac HT40：-85dBm（MCS0）, -60dBm（MCS9）
11ac HT80：-82dBm（MCS0）, -57dBm（MCS9）
11ax HT80：-82dBm（MCS0）, -57dBm（MCS9）, -52dBm（MCS11）
11ax HT160：-80dBm（MCS0）, -49dBm（MCS11） |
|
Antenna
|
Integrated antenna design |
|
Antenna Gain
|
2.4G: 3dBi
5G: 3dBi
|
|
Service Ports
|
3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out) |
|
Management Port
|
1 console port |
|
USB
|
1 USB 2.0 port |
|
IoT Capability
|
BLE
|
|
Reset Button
|
Support |
|
Anti-theft Lock
|
Support |
|
LED Indicator
|
1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) |
|
Transmit Power
|
≤100mw（20dBm） (vary depending on different countries)
|
|
Adjustable Power
|
1dBm |
|
Power Supply
|
Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed.)
PoE+ (802.3at)
PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled
|
|
Power Consumption
|
＜25.4W |
| Physical Specifications |
|
Temperature
|
Operating Temperature: -10°C to 50°C |
| Storage Temperature: -40°C to 70°C |
|
Humidity
|
Operating Humidity: 5% to 95% (non-condensing) |
| Storage Humidity: 5% to 95% (non-condensing) |
|
Installation Mode
|
Ceiling/wall-mountable |
|
Dimensions (W x D x H)
|
220mm ×220mm x48.85mm（Height of the AP only, excluding the mount kit） |
|
Weight
|
1.30kg |
|
IP Rating
|
IP41 |
|
MTBF
|
250,000 hours |
|
Certifications and Compliance
|
|
Safety Standard
|
GB4943, EN/IEC 60950-1 |
|
EMC Standard
|
GB9254, EN301 489
EN 55032 , EN 61000, EN 55035 |
|
Health Standard
|
EN 62311 |
|
Radio Standard
|
SRRC, EN300 328, EN301 893
|
|
Software Specifications
|
| WLAN |
Maximum clients per AP |
1024 |
| BSSID capacity |
Up to 32 |
| SSID hiding |
Support |
| 5G Priority (Band Steering) |
Support |
| Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
| Remote Intelligent Perception Technology (RIPT) |
Support |
| Intelligent device recognition technology |
Support |
| Intelligent load balancing based on the number of users or traffic |
Support |
| STA control |
SSID/radio-based |
| Bandwidth control |
STA/SSID/AP-based bandwidth control |
| Data encryption |
WPA（TKIP）, WPA-PSK, WPA2（AES）, WPA3, WEP（64/128 bits） |
| PSK and web authentication |
Support |
| PPSK authentication (For Employee) |
Support (require wireless controller) |
| 802.1x authentication |
Support |
| PEAP authentication |
Support |
| Data frame filtering |
Whitelist, static/dynamic blacklist |
| User isolation |
Support |
| Rogue AP detection and countermeasure |
Support |
| Dynamic ACL assignment |
Support |
| RADIUS |
Support |
| CPU Protection Policy (CPP) |
Support |
| Network Foundation Protection Policy (NFPP) |
Support |
| IP |
IPv4 and IPv6 address
|
Support
|
|
Multicast routing
|
Multicast to unicast conversion
|
|
DHCP service
|
DHCP Snooping, Option 82, Server, Client
|
|
Management and Maintenance
|
Supported wireless LAN controllers
|
Ruijie WS Series Wireless Controller
Ruijie MACC-Base Software Controller
Ruijie Cloud (Public Cloud) |
| Management protocol |
Telnet, SSH, TFTP, Web |
| Wireless Intelligent AI Optimization Service (WIS) |
Support |
| SNMP |
SNMPV1,V2c,V3 |
| Syslog / Debug |
Support |
| FAT/FIT/MACC mode switching |
Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
Đánh giá
Chưa có đánh giá nào.