Product |
ECW260 |
Technical Specifications |
Standards |
- IEEE 802.11b/g/n/ax on 2.4 GHz |
- IEEE 802.11a/n/ac/ax 5 GHz |
Processor |
Qualcomm® Quad-Core CPU ARM Cortex A53s @1.8GHz |
Antenna |
(4) External 5 dBi Dual-Concurrent Omni-Directional Antenna SMA-Type |
Physical Interface |
- 1 x 10/100/1000/2500 BASE-T, RJ-45 Gigabit Ethernet Port |
Power Source |
- Power-over-Ethernet: 802.3af/at |
- Proprietary 48V – 54V |
- IEEE 802.11e Compliant Source |
- Active Ethernet (PoE) |
Maximum Power Consumption |
15.9 W |
Surge Protection |
1KV |
ESD Protection |
- Contact: 4KV |
- Air: 8 KV |
Wireless & Radio Specifications |
Operating Frequency |
Dual-Radio Concurrent 2.4 GHz & 5 GHz |
Operation Modes |
AP, Mesh |
Frequency Radio |
- 2.4 GHz: 2400 MHz ~ 2482 MHz |
- 5 GHz: |
5150 MHz ~ 5250 MHz |
5250 MHz ~ 5350 MHz |
5470 MHz ~ 5725 MHz |
5725 MHz ~ 5850 MHz |
Transmit Power |
- 2.4GHz: 23dBm |
- 5GHz: 25dBm |
- Maximum power is limited by regulatory domain |
Tx Beamforming (TxBF) |
Increasing signal reliability and transmitting distance. |
Radio Chains/Spatial Stream |
2x2:2 |
SU-MIMO |
Two (2) spatial streams SU-MIMO for 2.4GHz and two (2) spatial streams SUMIMO for 5GHz up to 1,774Mbps wireless data rate to a single 11ax wireless client device under both 2.4G Hz and 5GHz radio. |
MU-MIMO |
Two (2) spatial streams Multiple (MU)-MIMO for up to 1200 Mbps wireless data rate to transmit to one (1) two streams MU-MIMO 11ax capable wireless client devices under 5GHz simultaneously |
Two (2) Multiple (MU)-MIMO for up to 574 Mbps wireless data rate to transmit to one (1) two streams MU-MIMO 11ax capable wireless client devices under 2.4GHz simultaneously. |
Supported Data Rates (Mbps): |
- 2.4 GHz: Max 574 |
- 5 GHz: Max 1200 |
Management |
Multiple BSSID |
8 SSIDs for both 2.4GHz and 5GHz radios |
VLAN Tagging |
- Supports 802.1q SSID-to-VLAN Tagging |
- Cross-Band VLAN Pass-Through |
- Management VLAN |
Spanning Tree |
Supports 802.1d Spanning Tree Protocol |
QoS (Quality of Service) |
Complaint With IEEE 802.11e Standard WMM |
SNMP |
v1, v2c, v3 |
MIB |
I/II, Private MIB |
Wireless Security |
0 |
0 |
- OWE |
- Hide SSID in Beacons |
- MAC Address Filtering, Up to 32 MACs per SSID |
- Wireless STA (Client) Connected List |
- SSH Tunnel |
- Client Isolation |
Environmental & Physical |
Temperature Range |
- Operating: -4º~140ºF/-20ºC~60ºC |
- Storage: -40Fº~176ºF/-40ºC~80ºC |
Humidity (non-condensing) |
- Operating: 90% or less |
- Storage: 90% or less |
Waterproof & Dustproof |
IP67-Rated Enclosure |
Device Dimensions & Weights |
ECW260 Device |
- Weight: 1.54 lbs. (0.7 kg) |
- 4.07” (124 mm)(W) x 7.48” (190 mm)(L) x 2.07” (52.5 mm)(H) |
Packaging |
Weight: 3.96 lbs. (1.8kg) |
- 9.21" (234 mm)(W) x 11.18" (284 mm)(L) x 5.67" (144 mm)(H) |
Certifications |
CE, FCC, IC |
Đánh giá
Chưa có đánh giá nào.